HDFury Vertex2 - Page 51

Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
51
4K Vertex² – User Manual
#vertex2 set oledfade x
where x is [0-255]
Sets the OLED display fade timer in seconds. After this time OLED goes blank
0 = no fade
Ex. #vertex2 set oledfade 60
#vertex2 set osd x
where x is [on / off]
Enables / disables osd
Ex. #vertex2 set osd on
#vertex2 set osdloc x y
where x is [1 - 1920] and y is [1 - 1080]
Sets the OSD information location coordinates. For 4k the values are 4x
Ex. #vertex2 set osdloc 50 850
#vertex2 set osdfg x
where x is [1 - 31]
Sets the OSD foreground color
Ex. #vertex2 set osdfg 20
#vertex2 set osdbg x
where x is [1 - 31]
Sets the OSD background color
Ex. #vertex2 set osdbg 20
#vertex2 set osdlevel x
where x is [0 - 7]
Sets the OSD opacity level
Ex. #vertex2 set osdlevel 4
#vertex2 set osdfade x
where x is [0-255]
Sets the OSD fade timer in seconds. After this time OSD info disappears
0 = no fade
Ex. #vertex2 set osdfade 20
#vertex2 set osdfield x y
where x is [source / video / videoif / hdr / hdrif / audio / rxhdrforce
rxvideoforce / ignoremetadata] and y is [on / off]
Sets the OSD field parameter visibility
Ex. #vertex2 set osdfield videoif off