Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
#vertex2 set osdmaskloc x y x1 y1
where x and x1 are [1 - 1920] and y and y1 are [1 - 1080]
Sets the OSD mask information location coordinates. For 4k the values are 4x
Ex. #vertex2 set osdmaskloc 50 850 1900 900
#vertex2 set osdmask x
where x is [on / off]
Enables / disables osdmask
Ex. #vertex2 set osdmask on
#vertex2 set osdmasklevel x
where x is [0 - 7]
Sets the OSD opacity level
Ex. #vertex2 set osdmasklevel 4
#vertex2 set osdmaskgray x
where x is [0 - 15]
Sets the OSD gray level
Ex. #vertex2 set osdmaskgray 4
#vertex2 set osdtextloc x y
where x is [1 - 1920] and y is [1 - 1080]
Sets the OSD text location coordinates. For 4k the values are 4x
Ex. #vertex2 set osdtextloc 50 20
#vertex2 set osdtextneverfade x
where x is [on / off]
Osd text typically fades together with normal OSD.
This setting can disable fading.
Ex. #vertex2 set osdtextneverfade on
#vertex2 set osdtextstr x
where x max 64 characters
Defines the specific text string to be displayed. Must be in enlosed in quotation
Ex. #vertex2 set osdtextstr "HDFury 2019"
#vertex2 set osdtext x
where x is [on / off]
Enables / disables osdtext
Ex. #vertex2 set osdtext on
#vertex2 set mutetx0audio x
where x is [on / off]
Mute the tx0 hdmi audio output
To Next Page
Loading...
