20
Loop Settings
Use the Loop Settings page to configure the settings for an individual loop.
To show the loop settings, tap the Navigation Menu icon in the top-left corner of the
touchscreen, and then tap the Loop Settings icon.
Tempo and Click Tab:
Tempo: This setting determines the tempo of the loop. Tap the BPM on the touchscreen, and
then use the encoder to set the current loop's tempo, from 30–280 BPM.
Time Signature: This setting determines the time signature of the loop. Tap the time signature,
and then use the encoder to set the time signature of the current loop: 2/4, 3/4, 4/4, 5/4, 6/4,
7/4, 5/8, 6/8, 7/8, 8/8, 9/8, 10/8, 11/8, 12/8, 13/8, 14/8 or 15/8.
Click: This setting determines the function of the click track. Set to Rec to enable while
recording and overdubbing, or set to Play+Rec to enable when playing or recording and
overdubbing. Set to Off to disable the click.
Count-In: This setting determines how the count-in feature functions. Set to On to enable the
count-in before a loop starts to play, record or overdub. Tap the Bar value on the touchscreen
and turn the encoder to adjust the number of measures for the count-in. Set to Off to disable
the count-in.
Looper Mode Tab:
Looper Mode: Choose one of the five available Looper Mode settings on this tab for your loop.
For more information about the Looper Mode settings, see the Looper Modes chapter of this
manual.
To Next Page
Loading...
