HEADRUSH Looperboard - USB Connection; Transferring Files and Settings

35
USB Connection
You can use the HeadRush Looperboard's USB Type-B Port to connect to a computer for
Transferring Files and Settings (such as loops, backing tracks, etc.), or for Recording (to a digital
audio workstation [DAW]).
Transferring Files and Settings
You can transfer loops, backing tracks, audio for importing and FX Rack preset files over a USB
connection between your computer and HeadRush Looperboard.
To transfer files between HeadRush Looperboard and your computer:
1. Use a standard USB cable to connect HeadRush Looperboard's USB Type-B Port to an
available USB port (type-A) on your computer.
2. With your computer already powered on, power on HeadRush Looperboard using the power
switch.
3. Tap the Navigation Menu icon in the top-left corner of the touchscreen, and then tap USB
Transfer.
4. On your computer, HeadRush Looperboard will appear as a mass-storage device called
HeadRush.
Windows users: If this is the first time you have connected HeadRush Looperboard to your
computer, you may need to wait a minute while the class-compliant drivers are installed.
5. Open the HeadRush drive. You can now freely click and drag contents between HeadRush and
your computer. Note that any changes you make to the contents of your HeadRush are
immediate and cannot be cancelled.
Important: When you are finished transferring contents, you must unmount/eject the HeadRush
drive from your computer.
6. After the drive has been ejected, tap Sync on your HeadRush Looperboard to "commit" any
changes you made to the contents of the HeadRush drive. An additional prompt will appear to
confirm you have ejected the drive. Tap Proceed to continue or Cancel to continue accessing
files on your computer.
Important:
Do not disconnect or power off HeadRush Looperboard or your computer during the process. Doing
so may result in damage.
Any files unsupported by HeadRush Looperboard will be ignored.
You cannot transfer an archived folder (such as a .zip) to and from HeadRush Looperboard. Instead,
transfer supported files directly.