6
14. USB Type-A Ports: Connect USB flash drives to these USB ports for additional storage. You
can save and load loops with the connected USB flash drive, as well as record loops directly to
the flash drive itself. See Storage for more information.
You can also play backing tracks directly from the USB drive. See Backing Track Player for
more information.
Lastly, you can connect class-compliant USB devices to these USB ports for external MIDI
control. See External MIDI Control for more information.
15. SD Card Slot: Insert a standard SD/SDHC card into this slot for additional storage. You can
save and load loops with the connected USB flash drive, as well as record loops directly to the
flash drive itself. See Storage for more information.
You can also play backing tracks directly from the USB drive. See Backing Track Player for
more information
Important: To avoid file loss or damage to your media, only disconnect USB and SD storage
devices from HeadRush Looperboard while it is powered off. Alternatively, go to the Storage
page and then tap the storage device’s eject icon.
To Next Page
Loading...
