Heatmiser Touchpad (TFT) - Timer Zones Configuration; Editing Switching Times; Copying Switching Time Settings

1817
Touchpad Model: TFT
Timer Zones
Editing the Switching Times
The Edit icon enables you to program the switching times for the selected time clock.
Time clocks provide Weekday/Weekend or 7 Day Programming options.
If the time clock shows Weekday/Weekend it is operating in 5/2 day mode, and if it
shows each day of the week it is operating in 7 day mode.
This mode can be changed on the time clock, and will be updated automatically on the
Touchpad. Please consult the time clock manual for instructions on how to change this.
There are 4 settings per day, these are called Wake, Leave, Return and Sleep.
For each setting a Timer ON and a Timer OFF time can be programmed.
To program the switching times follow these steps.
• Press the Edit icon .................................................................................................................
• Select a day or period ..........................................................................................
• Select a setting to program ........................................................................................
• Edit the Timer ON and Timer OFF times using the arrow keys .........................
Times should be entered in 24 hour format.
For unused periods set the time to -- : -- and the time clock will ignore the setting.
• Repeat these steps for the remaining days/periods.
• Press the Done key to conrm and exit ..........................................................................
Note: For Weekday/Weekend programming, the 4 switching times are the same for all
weekdays but can be dierent for the weekends.
For 7 Day programming, each day can have 4 dierent switching times.
Copy Settings
The Copy key enables you to copy the programmed switching times to other time
clocks that are operating in the same mode (5/2 or 7 day).
To Copy and apply switching times follow these steps.
• Press the Copy key .........................................................................................................
Zones that can be selected will be blue and will turn green when selected.
Zones in grey cannot be selected.
• Press the Done key to conrm and exit ...................................................................