Heatmiser Touchpad (TFT) - Programmable Zones Configuration; Adjusting Set Temperature; Editing Comfort Levels; Copying Comfort Level Settings

2423
Touchpad Model: TFT
The set temperature can be adjusted by using the Up/Down keys.
• Use the Up/Down keys to select a temperature .................................................
• Press the Apply key ............................................................................................................
Note: This override will be maintained until the next programmed comfort level.
The Edit icon enables you to program the comfort levels for the selected thermostat.
Thermostats provide Weekday/Weekend or 7 Day Programming options.
If the thermostat shows Weekday/Weekend it is operating in 5/2 day mode, and if it
shows each day of the week it is operating in 7 day mode.
This mode can be changed on the thermostat, and will be updated automatically on
the Touchpad.
Please consult the thermostat manual for instructions on how to change this.
There are 4 settings per day, these are called Wake, Leave, Return and Sleep.
For each setting a start time and temperature can be programmed, this temperature
will be maintained until the next comfort level.
Programmable Zones
Temperature Control
Programmable Zones
Editing the Comfort Levels
To program the comfort levels follow these steps.
• Press the Edit icon ...............................................................................................................
• Select a day or period .........................................................................................
• Select a setting to program ........................................................................................
• Edit the time and temperature values using the Up/Down keys ....................
Times should be entered in 24 hour format.
For unused periods set the time to -- : -- and the thermostat will ignore the setting.
• Repeat these steps for the remaining days/periods.
• Press the Done key to conrm and exit ........................................................................
Note: For Weekday/Weekend programming, the 4 comfort levels are the same for all
weekdays but can be dierent for the weekends.
For 7 Day programming, each day can have 4 dierent comfort levels.
Copy Settings
The Copy key enables you to copy the programmed comfort levels to other thermostats
that are operating in the same mode (5/2 or 7 day).
To Copy and apply comfort levels follow these steps.
• Press the Copy key ...............................................................................................................
Zones that can be selected will be blue and will turn green when selected.
Zones in grey cannot be selected.
• Press the Done key to conrm and exit ........................................................................