Heatmiser Touchpad (TFT) - Room Title and Clock Setup; Entering Room Titles; Setting the System Clock and Date

87
Touchpad Model: TFT
Setting the Clock
To set the clock, follow these steps.
Press the Options tab.
Press the Clock icon ......................................................................................................................
Here you can set the current time and date and select whether the Touchpad should
observe GMT Correction. GMT correction will automatically change the clock on the
Touchpad and Thermostats in March and October as the clocks change for Winter/
Summer time.
Press Done to store and exit ......................................................................................................
Initial Setup
Entering a Room Title
A room title of 13 characters can be entered for each room on the system.
To enter a room title follow these steps.
Press the Communication number ...........................................................................................
Using the alphanumeric keypad, enter a title.
Press Done to store and return to the network screen ......................................................
Repeat as necessary for the other rooms.
When nished, press Done from the Network screen to store and exit ......................
Note: You must perform a new network scan after adding additional thermostats to your
system.