Heatmiser Touchpad (TFT) - Programmable Zones Management; Individual Zone Temperature Hold; Programmable Zone History Data

2221
Touchpad Model: TFT
Programmable Zones
Temperature Hold (Individual Zone)
The temperature hold function allows you to manually override the current operating
program of a specic zone and set a dierent temperature for a desired period
To set a hold a temperature for a group of thermostats, use the Hold function from the
main screen.
To set a hold time follow these steps.
• Press the Temp Hold icon ....................................................................................................
• Set the Hold temperature and Hold time using the arrow keys ......................
• Press the Done key to conrm and exit .........................................................................
The thermostat and zone screen will show the hold time remaining.
To cancel a hold in operation, press Temp Hold icon and then the Cancel Hold key ..
Programmable Zones
History
The history function on a programmable zone enables you to see the hours run as a
and temperature prole for the last 4 weeks.
This is displayed in a bar chart and line graph and provides an indication of which
zones are using the most energy.
The information can additionally be exported to your PC.
There are two export methods:
• Export All will export the temperature prole for all zones.
• Zone Export will export just the selected zone.
The exported data is saved to csv format and can be edited in Excel.