hecht 8616 - Machine Maintenance; Lubrication; Tire Pressure; Replacing and Repairing the Tires

44 / 64
PL
SK
DE
EN
CS
HU
Clean combustion chamber
**
every 200 hours
Inspection of carburetor
adjustment**

Replacement of fuel tank
plug

Marked items:
* See the instructions
** These operations must be done in authorised service center
*** First change of engine oil after 5 operation hours, at operations with high load follows
change after 25 operating hours
MACHINE MAINTENANCE
• Careful handling and regular cleaning ensure that the machine remains functional and
efficient for a long time.
• Keep the machine in good condition, if necessary change warning and instruction labels on
the machine.
• Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
• To reduce the fire hazard, keep the engine, silencer and petrol storage area free of all debris
or excessive grease.
• Always ensure that the ventilation openings are kept clear of debris.
• Replace worn or damaged parts for safety. Use only original spare parts.
LUBRICATION
WARNING! B
Disconnect spark plug before servicing!
All rotating parts should be lubricated at least after every 25 hours or once a season of operation
lubricate by light machine oil.
CAUTION! A
Avoid oil spillage on rubber friction wheel and aluminum drive plate.
TIRE PRESSURE
Regularly check tire pressure keep it at the specified values (see Specifications).
REPLACING AND REPAIRING THE TIRES
All puncture repairs or replacements will have to be carried out by a tire repair expert in
accordance with the methods for the kind of tire used.
Use only specified tire sizes (see Specifications).
WHEELS
At least once a season, remove both wheels. Clean and coat the axles with a multipurpose
automotive waterproof grease before reinstalling wheels.