ND 1200 QUADRA-CHEK 113
2.3 Software setup
U Highlight the Retain features choice field and then press the YES
soft key to retain features in the feature list across power cycles.
Press the NO soft key if discarding features when the power is
turned off is preferred.
U Highlight the Distances choice field and press the SIGNED soft key
to display + and - distances. Press the ABS soft key to display
distances as absolute values.
U Highlight the Startup zero choice field and press the YES soft key to
require a machine zero upon startup by crossing reference marks or
by prompting the user for a hard stop. Press the no soft key if no
machine zero is required.
A machine zero is required when SLEC or NLEC error
correction is used.
Select YES to retain features across
power cycles
Select ABS to display distances without
+ and - signs
Select YES to require a machine zero
upon startup
To Next Page
Loading...
