114 2 Installation and Specifications
2.3 Software setup
U Highlight the Targeting zone data field and enter the target box size
displayed when running a program that uses optical edge detection
for part probing. Points outside the target zone box will not be
recognized when the program is running.
U Highlight the Pause Tol Results choice field and press the desired
soft key to pause program execution in response to tolerance tests:
U Highlight the Print Tol Results choice field and press the desired soft
key to print a report in response to tolerance tests:
U Press the FINISH key to return to the setup menu.
Soft key Result
Never Never pauses a program in response to tolerance
results
If Fail Pauses a program if a tolerance fails
If Pass Pauses a program if a tolerance passes
Always Pauses a program after each tolerance test
Soft key Result
Never Never prints a report in response to tolerance results
If Fail Prints a report a program if a tolerance fails
If Pass Prints a report if a tolerance passes
Always Prints a report after each tolerance test
Enter a targeting zone for edge detection
programs
Select a program pause in response to
tolerance testing
Select report printing in response to
tolerance testing
To Next Page
Loading...
