6 – 252 HEIDENHAIN Technical Manual TNC 426, TNC 430
Module 9082 Showing a string in the small PLC window
The string is designated with a string number or is transferred as an immediate
string and ends with the ASCII character <NUL>. It is shown in the small PLC
window in line 0 or 1, with each character in the color given for it (see table).
In the event of error, no string is shown.
References to PLC dialogs or PLC error messages are executed:
n Entered dialog or error number not found:
Is replaced by the ASCII character “@”.
n Non-displayable character in the text (except string end):
Is replaced by the ASCII character “^”.
The character size is oriented to the size of the screen window or by the
current operating mode, and cannot be influenced.
Color two is the background color of the PLC window. It cannot be used as
foreground color.
If the specified color number is zero, the text is shown in the same color as
the character last shown. If the first character of a line is specified as zero, the
color is undefined and can change from one display line to another.
37
0
Line 0
Line 1
Column
Number Machine parameter
1 MP7354.0
2 MP7356.0
3 MP7352.0
4 MP7353.0
5 MP7357.0
6 MP7352.1
7 MP7353.1
8 MP7350
9 MP7357.1
10 MP7354.1
11 MP7356.2
12 MP7356.1
13 MP7354.2
14 MP7352.2
15 MP7351
To Next Page
Loading...
