December 2001 Display and Operation 6 – 261
CPOS=column, line
Writes the next text or graphic at the designated position. The width of a
column is calculated from the current character set. The height of a line is
preset and can be changed with LINEDIST.
line = Line on the current page
column = Column from the left edge of the window
ICPOS=column, line
Writes the next text or graphic at a position offset from the present position
by the specified number of lines and columns. The width of a column is
calculated from the current character set. The height of a line is preset and can
be changed with LINEDIST.
line = Distance in lines from the old line
column = Distance in spaces from the old space
LINEDIST=ypix Defines the line spacing. The default setting depends on the
character size and is reset with every call of CHARSIZE.
COLOUR=[f] or COLOR=[f]
Sets the foreground color. Value range for f: 1 to 14
Default setting: Color 11
The colors are defined in MP7367. (See "Color Setting” on page 6 – 225).
CURSOR=ON/OFF
Switches the inversion (highlighting) on and off.
Default setting: OFF
CHARSIZE=SMALL/MEDIUM/LARGE/AUTO
Defines the character size.
Split screen: SMALL
Large PLC window: MEDIUM
AUTO: Character size depends on the window size.
Default setting: AUTO
With every call of CHARSIZE, the value of LINEDIST is overwritten by a default
setting that depends on the character set.
Preset spacing:
GRAPHICS= <fname> [/c]
Links a graphic into the window. With POS, IPOS or ICPOS, enter a position. The
lower left corner is set to the current position. Graphics are created as .DXF
files in a CAD program, and are then converted with PLCdesign.
<fname> contains a file name with path, or the file name only. In this case the
path in MP7230.3 is added (language for help files).
Switch /c : The graphic is cyclically refreshed.
Line Column
SMALL 168 pixels
MEDIUM 2416 pixels
LARGE 4832 pixels
To Next Page
Loading...
