December 2001 List of Machine Parameters 4 – 27
MP2361 Time constant for braking the first spindle in an emergency
stop
Input: 0.01 to 5.00 [s]
0: Function inactive
280 474-10 6 – 198
MP2391 Maximum power for braking the first spindle in an
emergency stop
Input: 0.1 to 3000.000 [kW]
0: Braking power is not limited
280 474-10 6 – 200
MP2391.0 Wye connection
MP2391.1 Delta connection
MP2393 Power limiting of spindle motor
Input: 0: No power limit
0.1 to 3000.000 [kW]
280 476-01 6 – 192
MP2393.0 Wye connection
MP2393.1 Delta connection
MP2395 Maximum power for braking the first spindle in a power
failure
Input: 0.1 to 3000.000 [kW]
0: Braking power is not limited
280 476-09 6 – 200
MP2395.0 Wye connection
MP2395.1 Delta connection
MP2397 Maximum torque of the spindle motor
Input: 0: No torque limiting
0.1 to 3000.000 [Nm]
280 476-13
PLC
6 – 192
MP2397.0 Wye connection
MP2397.1 Delta connection
MP2400.0-8 Gain for current controller at standstill for axes 1 to 9
Input: 0.00 to 9 999.00 [V/A]
0: Controller disable
6 – 148
MP2401 Gain for the spindle current controller at standstill
Input: 0.00 to 9999.99 [V/A]
0: Controller disable
6 – 213
MP2402.0-8 Gain for current controller at maximum speed
for axes 1 to 9
Input: 0.00 to 9999.99 [V/A]
0: Value from MP2400.x
6 – 148
MP2403 Gain for the spindle current controller at maximum speed
Input: 0.00 to 9999.99 [V/A]
0: Value from MP2401
6 – 213
MP Function and input Software
version and
behavior
Page
To Next Page
Loading...
