December 2001 Machine Axes 6 – 17
Spindles All position encoder inputs may be used for the spindle/spindles. The possible
groupings of speed encoder inputs and nominal speed value outputs can be
seen in the following tables:
LE 426 PB/M, 12 000 rpm
LE 426 PB/M, 30 000 rpm
LE 430 PA, LE 430 M/6 Axes
LE 430 M/9 Axes
First spindle Second spindle
Speed Nominal value Speed Nominal value
X15 to X20
Digital:
X51 to X56 –
Analog:
1 to 13
–
Analog:
1 to 13 –
Analog:
1 to 13
First spindle Second spindle
Speed Nominal value Speed Nominal value
X60
Digital:
X61 X15 to X19
Digital:
X51 to X56
X60
Digital:
X61 –
Analog:
1 to 13
–
Analog:
1 to 13 –
Analog:
1 to 13
First spindle Second spindle
Speed Nominal value Speed Nominal value
X60
Digital:
X61 X15 to X20
Digital:
X51 to X56
X60
Digital:
X61 –
Analog:
1 to 13
–
Analog:
1 to 13 –
Analog:
1 to 13
First spindle Second spindle
Speed Nominal value Speed Nominal value
X60
Digital:
X61
X15 to X20,
X62 to X64
Digital:
X51 to X59
X60
Digital:
X61 –
Analog:
1 to 13
–
Analog:
1 to 13 –
Analog:
1 to 13
To Next Page
Loading...
