NETLink
®
PRO family Application Examples
10 WinCC V7.4 (Siemens AG) 45
10.1 Add the protocol driver 45
10.2 Creating a variable 46
11 WinCC flexible 2005/2007 (Siemens AG) 48
11.1 Configuring connections 48
11.2 Configuring the PG/PC interface 49
12 ZenOn V6.2 (COPA-DATA) 50
12.1 Configuring Zenon 50
12.2 Setting the driver 51
12.3 Driver configuration 51
12.4 Integrating variables in images 52
13 Address conversion table 53
14 Troubleshooting 54
15 Directory of Sources 56
To Next Page
Loading...
Need help?
General
