Users Manual Henkovac 04-serie V2019
3.0 Welcome
Thank you very much for your purchase of a Henkovac vacuum packaging machine. In order to guaran-
tee the reliability, longevity and robustness of your equipment, we only used materials of the highest
quality in the fabrication of your machine. During its design, it was our goal to make it easy to use and
simple to maintain.
Based on your purchase of this machine, we assume that you are familiar with the fundamentals of
vacuum packaging. For additional information and guidance about vacuum packaging applications, we
recommend that you contact your dealer.
To find out the location of your nearest dealer, please contact us at:
+31 73 627 12 73 or 77
or via e-mail info@henkovac.com.
3.1 Service from your Dealer
For technical support, please contact your dealer.
You may also contact us, so that we can assist you in locating your nearest dealer:
+31 73 627 12 73 or 77
Please have the following information available:
Machine type
Serial number
You can locate the serial number on the front page of this
manual. In addition, you can find it on the identification
plate on the right-hand side or back-side of your machine.
3.2 YouTube Henkovac Channel - Instruction and Service Videos
Instructional videos are placed on YouTube for the operation and service of your machine. You may lo-
cate these videos on the YouTube website under “Henkovac Channel”.
3.3 General Precaution
The vacuum machines must be connected to a grounded, metal, permanent wiring system or an
equipment-grounding conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the product.
For the table top models: “to provide continued protection against risk of electric shock connect to
properly grounded outlets only”.
For all models: “to reduce risk of electric shock and injury to persons, disconnect from power supply
before servicing”.
To Next Page
Loading...
