Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 13 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
Residual risks
Despite all precautionary measures taken, there may still be residual risks that are not
apparent.
Adhering to the safety instructions, the intended use, and the product manual as a whole can
reduce residual risks.
Danger caused by electrical current
Electrical residual energy remains in lines, equipment and devices after
shutting down the device.
Only qualified electricians may perform work on the electrical supply
system.
Disconnect the unit from the power supply system if active parts of the
unit can be accessed using tools. Access is only permitted by
authorised personnel.
Regularly check the electrical equipment of the unit. Regularly check all
moving cables for damage within the scope of maintenance and repair
work.
Dangers of fire and explosion
There is a risk of fire and explosions in the vicinity of the device.
Smoking, exposed flames and fire are strictly prohibited in the vicinity of
the unit. Do not store any flammable liquids within the hazardous area of
the device.
A fire extinguisher must be kept in the vicinity of the device.
Warning of electromagnetic radiation
Electromagnetic radiation develops when transmitting and receiving
data.
Arrange the antenna in such a position that it is not in the vicinity or
make contact with the human body while transmitting.
The device satisfies the standard EN50364:2010 (Human Exposure).
Supplemental instructions
To Next Page
Loading...