HERMOS LFM LP Reader - Sensor Event Object Removed

Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 55 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
10.4.14 A – Sensor event object removed
The message of sensor events can be activated in the parameter "Watch-Port" (par. 07).
If this is activated, the reader reports every drop of the external sensor.
The sensor message must be confirmed by the host.
Host  Device
CMD
Reader-ID
A
1 Byte
Device  Host
CMD
Reader-ID
a
1 Byte
The sensor event is detected after an adjustable delay time (par. 0 Sensor Delay).
During the delay time, the sensor signal must be stable.
In parameter 1 "Read Mode" the sensor can be deactivated.