HERMOS LFM LP Reader - Sensor Event Object Detected

Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 56 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
10.4.15 B – Sensor event object detected
The message of sensor events can be activated in the parameter "Watch-Port" (par. 07).
If this is activated, the reader reports any recognition of the external sensor.
The sensor message must be confirmed by the host.
Host  Device
CMD
Reader-ID
B
1 Byte
Device  Host
CMD
Reader-ID
b
1 Byte
The assignment of the external sensor results in an automatic reading
and is not sent as a sensor event in standard ASC-I1 mode. However it
is possible to activate the sensor B event (->parameter 49).
In parameter 1 „Read Mode“ the sensor can be deactivated.