Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 9 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
5. Safety instructions and warnings
Scope and symbols
Follow the general safety instructions as well as special safety instructions included in the chapters.
The unit was built according to state-of-the-art technology and recognised safety regulations. In order
to prevent danger to life and limb of the user, third parties, or the unit, only use the unit for its intended
purpose and in perfect condition with regard to safety.
Bodily injuries and/or property damages resulting from non-compliance with the instructions provided in
the operating instructions are the responsibility of the company operating the unit or the assigned
personnel.
Faults that may compromise safety must be eliminated immediately.
Risk of death, injury and property damage.
There is a risk of danger due to disregard of the product manual and the
safety information contained therein.
Read the product manual carefully before putting the unit into operation for
the first time. Fulfil all required safety conditions.
Safety symbols - according to DIN 4844-2
The following special safety symbols in accordance with DIN 4844-2 are used at the corresponding
passages in the text of this product manual and require special attention depending on the combination of
the signal word and symbol.
Risk of injury due to disregarding the safety symbols.
Risks exist when disregarding warnings in the operating instructions.
Follow all warnings.
To Next Page
Loading...