Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 14 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
Read and understand all safety and operating instructions prior to installing and
operating the device.
This documentation was written for specifically trained personnel. The installation,
operation and error handling may only be carried out by specifically trained
personnel.
Keep these instructions. Keep this documentation in a location that is accessible
to all personnel involved with the installation, use, and error handling of the
device.
Follow all warnings. Follow all warnings on and in the device and in the
documentation.
Install the unit only in accordance with the manufacturer's instructions.
Use only the accessories and cables from the manufacturer.
Troubleshooting that is not described in the chapter service and
troubleshooting may only be performed by the manufacturer.
When connecting cable connections, only pull on the plug and not on the cable.
Only use spare parts specified by the manufacturer.
The provisions of the accident-prevention regulations of the government safety organisations always
apply to all work on the unit.
Applicable, legally binding accident prevention regulations.
Applicable binding regulations at the place of use
Technical standards for safety and professional work
Existing environmental protection regulations
Other applicable regulations
5.5.1 Regulations and certifications
The electrical design and documentation satisfy the DIN / VDE, EN / IEC regulations.
To Next Page
Loading...