Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 35 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
Customer modes
The reader LFM LP can be delivered with a few customer modes. The settings of the customermode is
part of the factory settings and can only be changed by Hermos. If customer needs another customer
setting, please ask Hermos for the necessary steps. The customercode can be read by parameter 64.
Customermode 0:
The antenna will be addressed by the ReaderID „0“ or TargetID „1“.
For the SECS protocol, the standard MID range of 2 pages / 16 characters is defined.
The RS232 port can be used for serial host communication.
To Next Page
Loading...