HERMOS LFM LP Reader - Page 95

Protocol description ASCII, SECS/HSMS
Customer manual
Version 1.2
LFM LP Reader 15.01.2019
Page 95 of 119
HERMOS AG
Gartenstrasse 19 Tel. +49(9279) 991-0
D-95490 Mistelgau Fax. +49(9279) 991-100
S18F5: Read data (host -> reading device, reply)
This message is used for requesting the antenna head specified in the TARGETID for reading data (from
the data area). DATASEG defines the start address of the data to be read. DATALENGTH defines the data
volume of the data to be read.
S18F5 W
<L,3
<TARGETID>
<DATASEG>
<DATALENGTH>
>
If both the DATASEG as well as the DATALENGTH are missing (elements with zero length), all pages of
the data area are queried. If only the DATALENGTH is missing, all data on the specified start address is
queried.
If the TARGETID is not known, a communication error (CE) occurs
S18F6: Read data, confirmation (reading device -> host)
This message is used to return the requested information of the antenna head specified in the TARGETID
or acknowledge the result of the request.
S18F6
<L,3
<TARGETID>
<SSACK>
<DATA>
>