Ex manual Rev 0 - Oct 29, 2014 16
A diagram of your transmitter version is included with these operating instructions. The diagram
forms part of the operating instructions. The arrangement of the control elements and the transmitter
labeling will vary subject to customer requirements, but generally will be the same as the labeling of
the previous controls. The only essential difference, in fact, is that you will now be able to exert
control without the need for cable connections.
Refer also to the manufacturer's operating instructions for your machine and the diagram of
your transmitter version to familiarize yourself with the arrangement of the control elements
and their functions!
The section below deals with the radio remote control system’s control elements and special
features.
Risk to life and property!
Check the EMERGENCY STOP function each time before
use as described in the manufacturer’s manual.
2.4.1. Visual checks
ALWAYS check the transmitter for damage each time before use!
Are all protection devices present and intact?
Are there any broken parts?
Are all the rubber sleeves, pushbutton caps and potentiometer knobs present and damage
free?
Are there any damaged or peeled labels?
Never work with a transmitter that is not complaint in any of
these ways!
Ensure that transmitter unit is repaired immediately by a
competent service person!
The explosion protection of this control is fully guaranteed only
when the housing and all mounted control elements show no
mechanical defect. At least protection class IP 54 has to be
guaranteed.
Ex manual Rev 0 - Oct 29, 2014 16
A diagram of your transmitter version is included with these operating instructions. The diagram
forms part of the operating instructions. The arrangement of the control elements and the transmitter
labeling will vary subject to customer requirements, but generally will be the same as the labeling of
the previous controls. The only essential difference, in fact, is that you will now be able to exert
control without the need for cable connections.
Refer also to the manufacturer's operating instructions for your machine and the diagram of
your transmitter version to familiarize yourself with the arrangement of the control elements
and their functions!
The section below deals with the radio remote control system’s control elements and special
features.
Risk to life and property!
Check the EMERGENCY STOP function each time before
use as described in the manufacturer’s manual.
2.4.1. Visual checks
ALWAYS check the transmitter for damage each time before use!
Are all protection devices present and intact?
Are there any broken parts?
Are all the rubber sleeves, pushbutton caps and potentiometer knobs present and damage
free?
Are there any damaged or peeled labels?
Never work with a transmitter that is not complaint in any of
these ways!
Ensure that transmitter unit is repaired immediately by a
competent service person!
The explosion protection of this control is fully guaranteed only
when the housing and all mounted control elements show no
mechanical defect. At least protection class IP 54 has to be
guaranteed.
Ex manual Rev 0 - Oct 29, 2014 16
A diagram of your transmitter version is included with these operating instructions. The diagram
forms part of the operating instructions. The arrangement of the control elements and the transmitter
labeling will vary subject to customer requirements, but generally will be the same as the labeling of
the previous controls. The only essential difference, in fact, is that you will now be able to exert
control without the need for cable connections.
Refer also to the manufacturer's operating instructions for your machine and the diagram of
your transmitter version to familiarize yourself with the arrangement of the control elements
and their functions!
The section below deals with the radio remote control system’s control elements and special
features.
Risk to life and property!
Check the EMERGENCY STOP function each time before
use as described in the manufacturer’s manual.
2.4.1. Visual checks
ALWAYS check the transmitter for damage each time before use!
Are all protection devices present and intact?
Are there any broken parts?
Are all the rubber sleeves, pushbutton caps and potentiometer knobs present and damage
free?
Are there any damaged or peeled labels?
Never work with a transmitter that is not complaint in any of
these ways!
Ensure that transmitter unit is repaired immediately by a
competent service person!
The explosion protection of this control is fully guaranteed only
when the housing and all mounted control elements show no
mechanical defect. At least protection class IP 54 has to be
guaranteed.
To Next Page
Loading...
