AB2200en_SARev.: 04 / 11.2023
WARNING
Dangers due to insufcient maintenance or maintenance not
carried out on time.
− Follow maintenance intervals.
− Check the device for visible damage or defects.
If any visible damage or defects are present, take the
device out of service and inform a service technician.
WARNING
Risk of electric shock due to ingress of water or other liq-
uids.
− Protect the device against external liquids.
− Do not pour any liquids into the interior of the device.
− Transport using original transport packaging.
WARNING
Contamination with hazardous substances and substance
mixtures!
Observe the following actions for substances and substance
mixtures that are toxic, radioactive and/or contaminated with
pathogenic microorganisms:
− As a rule, use only centrifuge tubes with special screw
caps for hazardous substances.
−
Use sealable centrifuge tubes with a biosafety system
for materials of risk groups 3 and 4.
− If no biosafety system is used, the device is not micro-
biologically tight in the sense of standard EN / IEC
61010-2-020.
− Contact the manufacturer if necessary.
WARNING
Risk of injury and damage to the device due to a loose rotor.
− The driver of the rotor shaft must be correctly seated in
the groove of the rotor when mounting the rotor.
−
Hand-tighten the nut securing the rotor.
− Check that the rotor is rmly seated.
−
Follow maintenance intervals.
CAUTION
Risk of injury due to rotating rotor
Long hair and items of clothing can get caught on the rotor if
the rotor is moved manually.
− Tie long hair back.
−
Do not allow garments to hang in the centrifuging
chamber.
To Next Page
Loading...
Need help?
General
