Hi-Target ZTS-320 Series - Select Files; Setup Station

50
9.1.1 Select files
The function „Surveying‟ includes a sum of all preparation
work before a survey,such as:
Select a measurement file to store and record the measured
result ,obtain he coordinate file for the known point,and search
the code file for the code quickly, etc.As to the alignment file ,it
is specifically for staking out roadway.
The dialogue box of „select file‟ is as followed:
MEA= Measurement File, working for storing data
COO= Coordinate File, used when calling coordinate
COD= Code File, used when calling code
LH= LS= Defined alignment File, working for staking out
roadway.
Use ▲▼ keys to move the indicator „>‟ to the wanted type
of file and press „Enter‟ to enter the interface of the File list as
followed:
Move the indicator to wanted file and press „ENT‟ or the soft
key „Enter‟ to select it.
9.1.2 Setup station
The dialogue box followed includes all information about
the station ,which needs to be entered.
F
I
L
E
A.MEA
TST1.MEA
A.COD
Setup Station
>STA:
Code:
T.H: 0.000
[★]Select file
Save K.Pt Info. M.Pt.
Select file
File(.MEA) A.MEA
>File(.COO)
File(.COD)
File(.LH)
Save Enter
New Del View Select