Hi-Target ZTS-320 Series - Resection

56
9.2.3 Resection .
Enter the coordinate of the first point:
To input, see reference in „STA‟ of „Coordinate
measurement‟. Press „ENT‟ to enter the measurement page of
„Resection-No.1‟
Choose the method of angle or distance for the resection. If
choosing distance mode, the instrument will start to measure.
After a successful measurement, the system will display „Next P‟
Press soft key „Next P‟. Repeat the process above. After
measuring three points, soft key „Calc‟ will appear on the screen.
If do not need resection, then pressing„Calc‟ to display the
result of resection.
Resection-N0.3
VZ: 77°18′30″
HR: 180°00′01″
HD: 4.978m
T.H: 1.000
Next P Calc
Resection-N0.3
VZ: 17°18′30″
HR: 10°00′01″
HD: 4.978m
T.H: 1.000
Mode Angle Dist
Resection-N0.1
VZ: 77°18′30″
HR: 180°00′01″
HD: 4.978 m
T.H: 1.000
Mode Angle Dist
Resection-N0.1
>Pt.name:
Code:
T.H: 1.000
[★]Select file
Save K.Pt Info. M.Pt.