HID DTC4000 User Manual

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
14
Telnet Command
Command Purpose
Command Format
media
Display information about the
installed media in the Printer.
list media
net
Display information about the
current network settings of the
Ethernet interface.
list net
stored
net
Display information about the
stored network settings of the
Ethernet interface.
list stored net
default
net
Display information about the
default network settings of the
Ethernet interface.
list default net
user
Display information about the
defined User names and their type
(root or guest privileges).
list user
lpq
Display information about print
jobs and their settings.
list lpq
printer
Display information about the
Printer (i.e., model number,
Firmware version and serial
number).
list printer
printer
sm
Display information about the
secure mark settings of the
Printer.
list printer sm
set
sysinfo
contact
Set the contact string.
set sysinfo contact [<STRING>]
location
Set the location string.
set sysinfo location [<STRING>]
label
Set the label string.
set sysinfo label [<STRING>]
from
Set all strings from
default or current
settings.
set sysinfo from default|current
logpath
name
Change the name of a
system log path
set logpath <LOG_NAME>
name <NEW_NAME>
type
Change the type of a
system log path. This
starts or stops logging
on start of jobs or on
set logpath <LOG_NAME> type
[[-]job] [[-]pfault]

HID DTC4000 Specifications

General

Brand	HID
Model	DTC4000
Category	Printer
Language	English