HID DTC4000 User Manual

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
15
Telnet Command
Command Purpose
Command Format
faults.
dest
Change the destination
of a system log path.
This may be set to
none, e-mail, udp or
tcp.
set logpath <LOG_NAME> dest
none|email|udp|tcp
email
Change the e-mail
address for e-mail
notification for a
system log path. It
must specify a valid e-
mail address.
set logpath <LOG_NAME> email
<EMAIL>
udp
Specify the IP address
of the UDP system
logging program.
set logpath <LOG_NAME> udp
<IPADDRESS>
from
Restore system log
path settings from the
default or current
settings.
set syslog from default|stored
set
user
add
Add a new User
definition.
Up to four (4) Users
may be defined.
set user add <NAME>
del
Delete a User
definition.
set user del <NAME>
passwd
Define a new password
for a User.
set user passwd <NAME>
[<PASSWORD>]
type
Specify a User as root
or guest.
Only root Users have
administrative rights to
change network
interface settings.
set user type <NAME>
root|guest
from
Restore User setting
from default or stored
settings.
set user from default|stored
store
net
addr
Store a new IP
store net addr <ADDRESS>

HID DTC4000 Specifications

General

Brand	HID
Model	DTC4000
Category	Printer
Language	English