VertX EVO V2000 Installation Guide, 72000-901, Rev. A.5
July 2016 Page 21 of 22
Appendix: D VertX Installation Worksheet
This installation worksheet is provided for you to have a historical record of your system settings.
Complete each appropriate field, and keep this worksheet in a safe location.
Record if the input is wired:
N/O or N/C 1.
Unsupervised or Supervised (resistor values) 2.
What type of device is attached? 3.
Record if output is wired:
N/O or N/C 1.
What type of device is attached? 2.
V2000 Information:
Customer Name: Contact:
Installed Location: MAC Address:
Hostname: IP Address:
Tamper: AC Fail: BATT Fail:
Input 1: Input 2: Relay 1: Relay 2:
Reader 1: Reader 2:
Door Switch 1: REX 1: Door Switch 2: REX 2
Strike Relay 1: Aux Relay 1: Strike Relay 2: Aux Relay 2:
To Next Page
Loading...
