8
Options Pop-up Menu
In the bottom right of the SpaceLinq screen, a pop-up menu displays a list of features including:
• Settings – Allows you to view information and manage a variety of app features.
• Dr. Dex – Allows you to ask first aid questions and receive information from the Dr. Dex application.
This application does not provide medical advice and is for entertainment, informational,
and educational purposes only. It is not a substitute for professional medical advice,
treatment, or diagnosis and should not be used for medical decision-making. Higher
Ground does not maintain or verify any information provided by the Dr. Dex application.
Instead, Dr. Dex is a third-party application provided by DiagnosisAI, Inc., that was
created and is maintained by practicing medical doctors. Dr. Dex (being a program), is
not itself a medical doctor, and the program does not allow you to interact in any way with
medical or other emergency professionals. If you have a medical emergency, please use
the SOS button to seek medical help without delay.
NOTE: You will only be charged one Message Credit for requesting and receiving a
response from Dr. Dex. In addition, since Dr. Dex uses AI (Artificial Intelligence) to
provide a response, you may receive the reply “I don’t understand the question” and need
to reword your question. If this happens, you will not be charged a Message Credit for
this exchange with Dr. Dex.
• Weather – Provides a detailed weather report and forecast for your approximate location. There are
three sections on this screen. The first includes detailed current conditions. The second
has a bi-hourly forecast for the next 12 hours. The third provides a seven-day forecast.
• Tracking – Allows you to send a message to set a track point that is stored with your location and
the date and time in your account. You can view your tracking data, including a map of
your track points on the website (www.satpaq.com) and in SpaceLinq using the Manage
Sharing… screen. You can also designate Tracking Contacts who will receive your
messages with a link to your tracking data and a map of your track points.
• SatView – Uses augmented reality to project the path and location of both satellites on your phone’s
camera’s real-time viewer. Use it to quickly locate in which direction to point the SatPaq
and to confirm there is an unobstructed path to at least one satellite. You can also select
which satellite to communicate with. When using SatView, you will hold the phone
pointed at the sky. This is a very different angle than when the SatPaq is attached and
you are communicating with the satellite.
• Share – Allows you to send messages to your Share Activity Contacts and/or post on Twitter. To
share messages, you must first enter at least one contact and/or enable the social media
account. Go to Settings, Manage SatPaq Account/Settings… and tap Manage Sharing....
THIS FEATURE IS ONLY DISPLAYED WHEN IT HAS BEEN ENABLED IN ADVANCED
MODE
NOTE: Recipients cannot reply to shared messages.