Body Camera User Manual
10
Quick charging is enabled by default. In quick charging mode, record and other functions
will be disabled. You can disable the function via Body Camera Assistant software. Refer to
3.5.8 Set Quick Charging for details.
2.3 Turn on/off LED Light
When the environment is dim or dark, or in emergency condition, you can hold to turn on
LED light for light supplement or emergency illumination. Hold the button again to turn off LED
light.
2.4 Record
After the device starts up, press , and the device vibrates for 0.5 second, indicating
record is enabled.
During record, hold , and the device vibrates for 0.5 second, indicating record is disabled.
If you have enabled post-record, during record, hold , and the device vibrates for 1 second.
After the set post-record time is up, the device vibrates for 0.5 second, and the post-record ends.
For post-record settings, refer to 3.5.5 Set Recording Parameters for details.
2.5 Tag Important record
You can tag the important record of the video for future search.
During record, press to make a tag, and the device vibrates for 0.5 second, indicating tagging
starts. The tagged files are named with IMP to distinguish with untagged files.
Tagging only takes effect with the current record. When the record ends, tagging stops.
You cannot cancel tagging after it starts.
2.6 Enable/Disable LED Recofding Mode
You can enable LED Recording mode, in which the indicators, LED light, IR lights, and vibration
will be disabled.
After the device starts up, hold to enable mute mode.
In mute mode, hold to disable the mode, and the device vibrates for 0.5 second,
indicating the mute mode is disabled.
To Next Page
Loading...
Need help?
General
