To Next Page

To Previous Page

Body Camera User Manual

3.5.9 Enable Overwritten Record

You can enable overwritten record to keep recording when the available memory is insufficient,

and the former recorded videos will be overwritten.

If you enable overwritten record, back up the important data in time, or they will be overwritten.

Step 1 Go to Device Configuration > Extended Settings.

Step 2 Check Overwritten Record to enable the function.

Step 3 Click Save.

Step 4 Reboot the device according to the prompt.

3.5.10 Set Vibration

Vibration is enabled by default to acknowledge you of the device working status. You can disable

the function.

Step 1 Go to Device Configuration > Extended Settings.

Step 2 Check or uncheck Vibration.

Step 3 Click Save.

Result

If vibration is enabled, the device will vibrate under different conditions. Refer to Quick Start Guide

for details.

3.5.11 Enable Dubug Mode

Debug mode is disabled by default. If you want to record the debug log, enable debug mode.

Step 1 Go to Device Configuration > Extended Settings.

Step 2 Check Debug Mode.

Step 3 Click Save.

Result

Click Log Information to view the debug log.

3.6 Export File

You can export videos to your computer via assistant or USB mode.

HIKVISION Body Camera User Manual

Questions and Answers: