HIKVISION Body Camera User Manual

Body Camera User Manual
29
Before you start
Prepare Bluetooth headsets.
Step 1 Go to Device Configuration > Extended Settings.
Step 2 Check Bluetooth.
Step 3 Click Save.
Connecting device via Bluetooth should be operated via Portable Device Assistant application.
Refer to the user manual of application for details.
3.11.5 Connect to Platform
You can log in to the device via platform to realize live view, data management, and so on.
Before you start
Set the connected platform. Refer to the platform user manual for details. Ensure the device can
communicate with the platform normally.
Step 1 Go to Device Configuration > Platform Settings.
Figure 3-26 Set Platform
Step 2 Check Enable.
Step 3 Edit IP, Port, and Device ID.
 IP: The IP address of platform server you want to connect.
 Domain Name: The domain address of platform server you want to connect.
 Port: The port of platform. The default port of iVMS is 7660.
 Device ID: When adding device via platform, the ID is needed. It is the unique
identification.
Step 4 Click Save.

HIKVISION Body Camera Specifications

General

Image Sensor	CMOS
Waterproof Rating	IP67
GPS	Yes
Wi-Fi	Yes
Bluetooth	Yes
Video Resolution	1080p
Night Vision	IR