HIKVISION Body Camera User Manual

Body Camera User Manual
28

Result the network operator to obtain static Wi-Fi.

Wi-Fi function varies with different models. The actual product prevails.
3.11.3 Set Wi-Fi AP
The body camera can be set as a hotspot to share network to other devices.
Wi-Fi and Wi-Fi AP cannot be enabled simultaneously.
Step 1 Go to Device Configuration > Network Settings > AP Hotspot Param.
Figure 3-25 Set Wi-Fi AP
Step 2 Check Enable.
Step 3 (Optional) Check Use Default SSID. When other device is connecting to the Wi-Fi AP, the
displayed SSID is the default one.
The default SSID of the body camera is names as Model_Serial No.
Step 4 Enter Key.
The default password of the body camera is abcd1234. Change the password to protect security.
Refer to 3.12.2 Change Password for details.
Step 5 Click Save.
Wi-Fi function varies with different models. The actual product prevails.
3.11.4 Set Bluetooth
You can connect the device to Bluetooth headsets.

HIKVISION Body Camera Specifications

General

Image Sensor	CMOS
Waterproof Rating	IP67
GPS	Yes
Wi-Fi	Yes
Bluetooth	Yes
Video Resolution	1080p
Night Vision	IR