Body Camera User Manual
16
Figure 3-9 Body Camera Assistant
3.2 Log in
Log in to the device via the assistant to operate.
Before you start
Connect the device to your computer with the USB cable, and turn on the device.
Step 1 Double-click the icon of Body Camera Assistant to start it.
Step 2 Click Recognize device to start recognizing. Then the recognized device will be listed.
Figure 3-10 Recognized Device
Step 3 Click the recognized device, input device password, and then click Login to log in.
The device default password is 123456. Change the password in time. Refer to 3.12.2 Change
Password for details.
3.3 Log out
Step 1 Click on the upper left corner of the interface.
To Next Page
Loading...
Need help?
General
