13
Figure 2.7 Activating the Device
2. Enter the new password in the New Password text field and confirm the password in the Confirm Password
text field.
Figure 2.8 Entering and Confirming the Password
The strength level of the password shows when you enter the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password
of your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password regularly, especially in the high
security system, resetting the password monthly or weekly can better protect your product.
3. Click Activate button to activate the keyboard. After the activation, the security status of the keyboard will
become Active.
Modifying Network Parameters
Purpose:
You can modify the network parameters of the keyboard by SADP.
Steps:
1. Select the checkbox before the ID of the DS-1600KI keyboard.
2. The Modify Network Parameters panel appears on the right. Enter the IP Address, Port, Subnet Mask and
Gateway in the corresponding text field. Or select the checkbox of Enable DHCP to get the network
parameters automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
