69
1. Click on the upper-right corner of the User Management interface for the operator to
logout.
Figure 4.72 Logout Interface for the Operator
2. Click Confirm to logout.
3. (Optional) Click to cancel the operation.
4.4.2 Storage Management
Purpose:
You can configure the FTP server parameters in Storage Management interface. In Live View mode, you can
upload captured pictures and records to the FTP server. Otherwise you can save them to the USB disk.
Before you start:
Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP
server on the PC and copy the firmware into the corresponding directory of your PC.
Configuring FTP server
Steps:
1. Select Storage on the right side to enter the Storage Management interface.
Figure 4.73 Storage Management Interface for the Admin
To Next Page
Loading...
