38
Figure 4.20 Viewing the Camera for the Operator
2. You can view the information of the camera including name, channel ID, protocol, stream, device, address
and channel No.
Name: The name of the camera as desired.
Channel ID: The serial number of the camera according to the added sequence.
Protocol: The transfer protocol of the camera.
Stream: The stream type of the camera.
Device: The name of the channel.
Address: The IP address and port of the corresponding device.
Channel No.: The No. of the added camera.
Editing the Camera by the Admin
Only the admin has the permission to edit the channel.
Steps:
1. Click to modify the details of the cameras. Only Name, Channel ID, Protocol and Stream are editable.
Figure 4.21 Editing the Camera
To Next Page
Loading...
