Control Panel User Manual
137
Command Address 460
For example: The first alarm connecter phone number is 17951-88075998, user
can input the following command:
Command Address 460
Command Address 461
For example: The first alarm connecter phone number is 0571-88075998-8888,
user can input the following command:
Command Address 460
Command Address 461
Q: What are notes for setting password?
A: The password for each operator should be different; otherwise the setting will
be failed. For example, if the password of operator 1 is set to be 1234 hen
password of operator 2 is also 1234, it will prompt to be error. In addition, the
password of each operator should be different from the control panel age
code of other operators; otherwise the setting will be failed. For example if
the password of operator No.3 is 3456 and the password of operator No.4 is
set to be3455 or 3457, it will prompt to be error.
Q: What are notes for setting duress code?
A:
1. The description of duress code is as follow:
Input duress code when the user is under duress, it will work as if the user
inputs valid password, but the system will auto-upload the alarm information.
For example when a criminal forces the user to disarm the alarm, user can
input the control panel age code to disarm the system and upload the alarm
information to the center automatically and off the criminal’s guard.
2. Please note when setting duress code: duress code is the valid password with
its last number±1.
For example: Valid Password: 1234, Duress Code: 1235 and 1233.
For example: Valid Password: 1230, Duress Code: 1231 and 1239.
To Next Page
Loading...
Need help?
General
