HIKVISION DS-19A08-F/Kx - Page 32

Control Panel User Manual
32
The fire alarm zone do not support the configuration of zone
loop type, and can only be set as 0,or an error value will be
returned.
{9} Tampering Prevention Linked Trigger
Command
Command
Description
Command
Command
Description
0
Non-linked Local
Alarm Output
1
Linking Local 1 Alarm
Output
2
Linking Local 2 Alarm
Output
3
Linking Local
1/2Alarm Output
4
Linking Local 3 Alarm
Output
5
Linking Local 1/3
Alarm Output
6
Linking Local 2/3
Alarm Output
7
Linking Local 1/2/3
Alarm Output
8
Linking Local 4 Alarm
Output
9
Linking Local 1/4
Alarm Output
*0
Linking Local 2/4
Alarm Output
*1
Linking Local
1/2/4Alarm Output
*2
Linking Local 3/4
Alarm Output
*3
Linking Local 1/3/4
Alarm Output
*4
Linking Local 2/3/4
Alarm Output
*5
Linking Local 1/2/3/4
Alarm Output
{10} Tampering Prevention Linked Siren Output
Command
Command
Description
Command
Command
Description
0
No Linked Siren
Output
1
With Linked Siren
Output
{11} No Tampering Prevention Recovery Report
Command
Command
Command
Command