HIKVISION DS-2CD3066G2-IS

the device or enable live view because of compability. The encrypted algorithm with high
strength is recommended.
5.
Click Save.
8.10 Set SRTP
The Secure Real-me Transport Protocol (SRTP) is a Real-me Transport Protocol (RTP) internet
protocol, intended to provide encrypon, message authencaon and integrity, and replay aack
protecon
to the RTP data in both unicast and mulcast applicaons.
Steps
1.
Go to Conguraon → Network → Network Service → SRTP .
2.
Enter the Port number.
3.
Set
Mulcast parameters.
Stream Type
The stream type as the mulcast source.
Video Port
The video port of the selected stream.
Audio Port
The audio port of the selected stream.
4.
Select Server Cercate.
5.
Select Encrypted Algorithm.
6.
Click Save.
Note
●
Only certain device models support this funcon.
●
If the funcon is abnormal, check if the selected cercate is abnormal in Cercate
Management .
8.11 Bonjour
It is an implementaon of zero-conguraon networking (zeroconf), a group of technologies that
includes service discovery, address assignment, and hostname resoluon. Bonjour locates devices
such as printers, other computers, and the services that those devices
oer on a local network
using mulcast Domain Name System (mDNS) service records.
Go to
Conguraon → Network → Network Service → Bonjour to enable the funcon, and click
Save.
Aer enabling the funcon, the device spread and receive service informaon in local area
network.
Network Camera User Manual
54