HIKVISION DS-2CD3066G2-IS User Manual

Mounng Type
Select le system protocol according to the operaon system.
Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is
selected.
4.
Set the Server Address and File Path for the disk.
Server Address
The IP address of the network disk.
File Path
The saving path of network disk
les.
5.
Click Test to check whether the network disk is available.
6.
Click OK to
nish the steps to add a Net HDD.
7.
Oponal: Congure the Net HDD.
Modify Click to modify the parameter seng.
Delete Delete the Net HDD.
●
Click .
●
Select the Net HDD, click Delete.
8.
Click Save.
5.1.4 eMMC
Protecon
It is to automacally stop the use of eMMC as a storage media when its health status is poor.
Note
The eMMC protecon is only supported by certain device models with an eMMC hardware.
Go to Conguraon → System → System Sengs → System Service for the sengs.
eMMC, short for embedded mulmedia card, is an embedded non-volale memory system. It is
able to store the captured images or videos of the device.
The device monitors the eMMC health status and turns
o the eMMC when its status is poor.
Otherwise, using a worn-out eMMC may lead to device boot failure.
5.1.5 Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The
plaorm requests picture
directly from the cloud for picture and analysis. The funcon is only supported by certain models.
Network Camera User Manual
30

HIKVISION DS-2CD3066G2-IS Specifications

General

Brand	HIKVISION
Model	DS-2CD3066G2-IS
Category	Security Camera
Language	English