User Manual of Digital Video Recorder 
 
113 
 
Figure 9. 10 Register the Device 
 
• Laview:   
Enter the Server Address and Device Domain Name for LAVIEW. 
1)  Enter the Server Address of the LAVIEW server, which is ns1.dvrlist.com by default. 
2)  Enter the Device Domain Name. You can use the alias you registered in the LAVIEW server 
or define a new device domain name. If a new alias of the device domain name is defined in 
the NVR, it will replace the old one registered on the server. You can register the alias of the 
device domain name in the LAVIEW server first and then enter the alias to the Device Domain 
Name in the NVR; you can also enter the domain name directly on the NVR to create a new 
one. 
 
Figure 9. 11 Laview DDNS setting interface 
Note: The device name can only contain the lower-case English letter, numeric and ‘-’; and it 
must start with the lower-case English letter and cannot end with ‘-’. 
 
Access the Device via Web Browser or Client Software 
After having successfully registered the device on the HiDDNS server, you can access your 
device via web browser or Client Software with the Device Domain Name (Device Name). 
OPTION 1: Access the Device via Web Browser 
Open a web browser, and enter http://www.hiddns.com/alias in the address bar. Alias refers to 
the Device Domain Name on the device or the Device Name on the HiDDNS server. 
Example: http://www.hiddns.com/dvr 
Note: If you mapped the HTTP port on your router and changed it to port No. except 80, you 
have to enter http://www.hiddns.com/alias:HTTP port in the address bar to access the device. 
You can refer to Chapter 9.2.5 Configuring NAT for the mapped HTTP port No. 
OPTION 2: Access the devices via NVMS7000 
For NVMS7000, in the Add Device window, select    and then edit the device 
information. 
Nickname: Edit a name for the device as you want. 
Server Address: www.hiddns.com 
Device Domain Name: It refers to the Device Domain Name on the device or the Device 
Name on the HiDDNS server you created. 
User Name: Enter the user name of the device. By default it is admin.