HIKVISION DS-2CD754FWD-E Installation Manual

Installation Manual of Network Camera
32
Figure 3-36 Drill Screw Holes
2. Cut the mounting holes on the ceiling with the supplied drilling template.
Figure 3-37 Cut Mounting Hole
3. Loosen the set screws with the hex key (supplied) to remove the lower dome; remove the dome
liner.
Screw hole
Mounting
hole

HIKVISION DS-2CD754FWD-E Specifications

General

Brand	HIKVISION
Model	DS-2CD754FWD-E
Category	Security Camera
Language	English