HIKVISION DS-2CD754FWD-E - Bullet Camera II; Appearance Description; Installation

Installation Manual of Network Camera
46
4.2 Bullet Camera II
4.2.1 Appearance Description
Camera description:
2
1
Figure 4-10 Overview
Figure 4-11 Overview
Table 4-2 Description
No.
Description
1
10M/100M self-adaptive Ethernet interface
2
Power supply
3
Sun shade
4
Adjusting screw
4.2.2 Installation
These bullet cameras can be installed to wall. Please refer to the steps below for installation.
Steps:
1. Attach the wall mount(not provided) to the wall and tighten the screws to fix it.
Notes:
 The wall mount should be longer than 1/2 of the camera length.
 For cement wall mounting, you need to use the expansion screw to fix the bracket. The
4
3