Figure 5-9 Insert Battery
3. Stick the drilling template to the ceiling.
Notes:
For cement ceiling mounting, you need to use expansion screw to fix the camera, and the
hole of the expansion pipe should align with the mounting hole of the drilling template.
For wooden ceiling mounting, you can just use the self-tapping screw to fix the camera.
The ceiling must be strong enough to withstand more than 3 times the weight of the
camera.
Figure 5-10 Drill Template
4. Use two PA4X24 screws to fix the camera to the ceiling and the screw hole on the camera
should align with the mounting hole on the drilling template.
To Next Page
Loading...
Need help?
General
