HIKVISION DS-2TD2637T-7/P User Manual

Chapter 4 Live View
It introduces the live view parameters, funcon icons and transmission parameters sengs.
4.1 Live View Parameters
The supported funcons vary depending on the model.
Note
For mulchannel devices, select the desired channel rst before live view sengs.
4.1.1 Window Division
●
refers to 1 × 1 window division.
●
refers to 2 × 2 window division.
●
refers to 3 × 3 window division.
●
refers to 4 × 4 window division.
4.1.2 Live View Stream Type
Select the live view stream type according to your needs. For the detailed informaon about the
stream type selecon, refer to Stream Type .
4.1.3 Enable and Disable Live View
This funcon is used to quickly enable or disable live view of all channels.
●
Click to start live view of all channels.
●
Click
to stop live view of all channels.
Note
Go to Conguraon → Local , to set Auto Start Live View, If Yes is selected, live view will start
automacally when you go to live view.
4.1.4 Start Digital Zoom
It helps to see a detailed informaon of any region in the image.
Steps
1.
Click to enable the digital zoom.
Thermal Opcal Bi-spectrum Network Camera User Manual
17

HIKVISION DS-2TD2637T-7/P Specifications

General

Brand	HIKVISION
Model	DS-2TD2637T-7/P
Category	Security Camera
Language	English